Mivan Grease is a formwork release and protective lubricant used with Mivan aluminium formwork systems and other aluminium shuttering applications. It is applied to the contact surface of formwork before concrete placement to help prevent concrete from adhering strongly to the shuttering.

Mivan Grease is also commonly searched as Mivan Shuttering Grease, Aluminium Formwork Grease, Mivan Formwork Release Agent, Aluminium Shuttering Release Agent, Mivan Oil and Formwork Release Grease.

Proper application helps make the stripping process easier while supporting cleaner formwork surfaces and better reuse of aluminium panels.

Concrete can adhere to shuttering surfaces when the formwork is used without an appropriate release product.

Mivan Grease helps create a separating layer between the concrete and aluminium formwork.

It can help with:

• Easier formwork removal
• Reduced concrete adhesion
• Cleaner aluminium panels
• Better panel reuse
• Reduced cleaning effort
• Improved formwork maintenance
• More efficient shuttering operations

Remove concrete residue, dust, dirt, and previous buildup from the aluminium panel.

Apply a thin and uniform layer of Mivan Grease over the concrete-contact surface.

Excessive grease should be avoided because an unnecessarily thick layer can affect the concrete surface.

After application, install and align the aluminium formwork panels according to the project procedure.

Concrete is poured into the prepared formwork.

After the concrete has reached the required condition for stripping, the aluminium panels can be removed according to the approved construction procedure.

The objective is to create a thin, continuous and uniform coating rather than a thick layer.

Recommended practice includes:

• Clean the panel before application.
• Remove hardened concrete deposits.
• Apply the product evenly.
• Avoid puddling or excessive accumulation.
• Pay attention to corners and edges.
• Keep the coating uniform.
• Follow the product manufacturer's application instructions.

The exact application quantity depends on the product formulation, panel condition, application method, and site conditions.

The release layer reduces direct adhesion between concrete and the aluminium formwork.

Proper release treatment can reduce concrete buildup on the panel surface.

Easier release can support efficient formwork removal during repetitive construction cycles.

Less concrete adhesion can reduce the amount of scraping and cleaning required after stripping.

Keeping aluminium panels cleaner can support their repeated use on construction projects.

A suitable formwork release product can help maintain the working surface of aluminium panels when used correctly.

Mivan Grease is primarily used with aluminium formwork systems in:

• Residential towers
• High-rise buildings
• Commercial buildings
• Apartment projects
• Mass housing projects
• RCC construction
• Repetitive floor construction
• Aluminium shuttering projects
• Concrete wall formwork
• Column formwork
• Beam formwork
• Slab formwork

Aluminium formwork is designed for repetitive use. Because the same panels may be used repeatedly, proper maintenance and release treatment become important parts of the formwork workflow.

Before every concrete cycle, the formwork surface should be inspected and prepared.

A typical workflow is:

Panel Cleaning → Mivan Grease Application → Formwork Assembly → Reinforcement Inspection → Concrete Pouring → Concrete Setting → Formwork Stripping → Panel Cleaning → Next Cycle

Both products can be associated with aluminium formwork release applications, but their formulation and application characteristics may differ.

• Grease-based release product
• Used on aluminium formwork surfaces
• Provides a lubricating/release layer
• Suitable where a grease-type release coating is specified

• Oil-based formwork release product
• Applied as a thin coating
• Commonly used for concrete formwork release
• Suitable where an oil-based release agent is specified

The correct product should be selected according to the formwork manufacturer's recommendations, concrete requirements, and project practice.

More release agent does not necessarily mean better release.

Excessive application can result in:

• Uneven coating
• Surface marks
• Oil or grease transfer
• Concrete surface imperfections
• Increased material consumption
• Unnecessary cleaning requirements

The objective should always be uniform and controlled application.

Yes, products specifically designed for aluminium formwork can be used for Mivan shuttering applications.

However, compatibility should always be checked against:

• Aluminium formwork system
• Product formulation
• Concrete mix
• Surface finish requirements
• Manufacturer recommendations

Mivan Grease is generally applied before a concrete pour when the formwork surface requires release treatment.

The required frequency depends on:

• Formwork condition
• Number of reuse cycles
• Cleaning procedure
• Product performance
• Concrete adhesion
• Site conditions

The surface should be inspected before each cycle rather than applying an unnecessarily heavy coating.

Good maintenance helps extend the working life of aluminium shuttering.

• Remove concrete residue.
• Clean the panels.
• Inspect for damage.
• Check panel edges and joints.
• Remove hardened deposits carefully.
• Store panels properly.
• Apply the specified release treatment before reuse.

• Keep panels protected from unnecessary contamination.
• Avoid damaging contact surfaces.
• Stack panels properly.
• Prevent accumulation of concrete residue.

Possible causes include:

• Insufficient release agent
• Uneven application
• Dirty formwork
• Incorrect product
• Poor surface preparation

Possible causes include:

• Excessive product application
• Uneven coating
• Contamination
• Accumulated grease or oil

Check:

• Release-agent coverage
• Panel cleanliness
• Concrete condition
• Formwork alignment
• Stripping procedure

Specifications depend on the particular Mivan Grease formulation.

Typical specification categories include:

• Product Type: Formwork Release Grease
• Application: Aluminium Formwork / Mivan Shuttering
• Primary Function: Concrete Release
• Application Method: Brush / Roller / Suitable Applicator
• Surface: Aluminium Formwork
• Usage: Concrete Construction
• Maintenance: Regular surface cleaning and reapplication
• Application: Thin, Uniform Coating

For procurement, the manufacturer's technical datasheet should be checked for exact properties such as consistency, coverage, operating temperature, storage conditions, and compatibility.

Before purchasing Mivan Grease, consider:

• Compatibility with aluminium formwork
• Concrete surface finish requirements
• Application method
• Coverage
• Ease of application
• Release performance
• Cleaning requirements
• Storage conditions
• Product consistency
• Project consumption
• Manufacturer's technical recommendations

Mivan Grease plays an important role in aluminium formwork maintenance and concrete release. When correctly selected and applied, it helps reduce concrete adhesion, simplify formwork stripping, maintain cleaner shuttering panels, and support repetitive aluminium formwork operations.

For high-rise construction, mass housing, residential towers, commercial projects, and other RCC applications using aluminium formwork, proper release-agent application should be considered an important part of the shuttering cycle.

TRP Machines & Tools provides construction and formwork-related products for contractors, builders, infrastructure companies, and civil engineering projects.

Phone: +91 7021994264Email: trpmachine19@gmail.comWebsite: www.trpmachines.com